| |
|
|
|
Digiplex systems provide the highest level of
protection for banks, high-security military and government sites,
luxurious residential homes and any place where maximum security is
essential. These systems are designed to be easy to use and the modular
concept of these systems provide installers with labour-saving features
that make expanding, installing and servicing these systems quick and
convenient.
Expand your system by adding plug-and-play expansion modules anywhere
and in any combination on the 4-wire combus. Modules are connected to
the combus at the most convenient location and only its used inputs are
assigned to zones in the system. Keyswitches, remote controls and unused
module inputs do not use up zones. Once installed, all combus modules,
including motion detectors, can be programmed remotely via a keypad or
the WinLoad upload/download software.
Digiplex systems are the logical solution to provide security, access
control and home automation for the most demanding installations.
|
Feature |
Digiplex
DGP-848 |
Digiplex
DGP-NE96 |
Zones* |
48 (8 on
board) |
96 (8 on
board) |
Partitions |
4 |
8 |
User Codes |
96 |
999 |
Access Control |
32 doors |
32 doors |
Events
Buffered |
1024 |
2048 |
PGMs |
125 (2 on
board) |
250 (3 on
board) |
Virtual Zones
† |
8 |
32 |
Expansion
Modules |
95 |
127 |
|
|
|
† Automate PGM activations without occupying
security zones. |
* Can be any combination of hardwire, wireless or
addressable zones. |
|
|
DGP-848 Digiplex Main Board
|
Features |
|
8 on-board zone inputs (16 with
zone doubling) expandable to 48 zones via 4-wire combus |
|
4 partitions |
|
96 user codes |
|
32 access control doors |
|
1024 events buffered |
|
95 expansion modules |
|
2 on-board PGMs (+2 optional PGMs and 1 bell
relay) |
|
PGM1 can be used as 2-wire smoke detector
input |
|
1.7A switching power supply |
|
Supervised bell output, auxiliary output and
telephone line |
|
Connect modules up to 900m (3000ft) using
18AWG or 300m (1000ft) using 22AWG |
|
Includes 28cm x 28cm x 7.6cm (11" x 11" x 3")
metal box |
|
|
DGP-NE96 Digiplex Main Board
Features |
|
8 on-board zone inputs (16 with
zone doubling) expandable to 96 zones via 4-wire combus |
|
8 partitions |
|
999 user codes |
|
32 access control doors |
|
2048 events buffered |
|
127 expansion modules |
|
3 on-board PGMs |
|
PGM1 can be used as 2-wire smoke detector
input |
|
1.7A switching power supply |
|
Supervised bell output, auxiliary output and
telephone line |
|
Built-in real-time clock backup battery (no
DGP2-TM1 required) |
|
Adjustable communication speed (normal/fast)
for large installations |
|
Connect modules up to 900m (3000ft) using
18AWG or 300m (1000ft) using 22AWG |
|
Includes 28cm x 28cm x 7.6cm (11" x 11" x 3")
metal box |
|
|
DNE-K07 Grafica Graphic LCD Keypad Module
Features |
|
View zones on up to 32 floor
plans |
|
View status of all zones on one
screen with zone grid (V1.3 or higher) |
|
Simple text- and icon-driven menus with
step-by-step guidance |
|
Alarm clock and special reminders |
|
15 tunes for use with door chiming, entry/exit
delay and more |
|
Supports 8 built-in languages in two Language
Sets (user selectable):
- LS1: English, Spanish, Czech, French, Hungarian, Italian,
Portuguese and Slovak
- LS2: English, Bulgarian, Czech, Polish, Romanian, Russian and
Swedish |
|
Smart search functions |
|
Copy and paste user programming |
|
Assign to one or more partitions |
|
Independently set chime zones |
|
3 one-touch panic alarms |
|
Adjustable backlight, contrast and volume |
|
Upload/download labels with Memory Key or
with the Module Broadcast feature |
|
On-site upgradable firmware with
Universal In-Field Programmer |
|
Dimensions (with door closed): 11.5cm x 17cm
x 3cm (4.5" x 6.8" x 1.3") |
|
6.5cm x 6.5cm (2.6" X 2.6") graphic LCD with
a resolution of 128 X 128 pixels |
|
|
DGP2-641R 32-Character LCD Keypad Module with Integrated Card Reader |
Features |
|
32-character LCD with
programmable labels (via Memory Key or Module Broadcast feature) |
|
Available in English, Spanish, Czech, French,
German, Hebrew, Italian, Polish, Portuguese, Russian, Swedish or
Turkish |
|
Assign to one or more partitions |
|
1 addressable zone and 1 PGM output |
|
Independently set chime zones |
|
14 one-touch action buttons |
|
3 keypad-activated panic alarms |
|
Adjustable backlight, contrast and scroll
speed |
|
Built-in card reader. Just present access
card directly to the keypad module |
|
Grant access via card and/or access code |
|
Door contact and request for exit inputs |
|
Door lock output |
|
Programmable automatic unlocking schedule |
|
Door Left Open and Door Forced Open alarms |
|
Display time using the 12hr or 24hr format |
|
|
DGP2-641RB 32-Character Blue LCD Keypad Module with Integrated Card Reader |
Features |
|
32-character blue LCD with
programmable labels (via Memory Key or Module Broadcast feature). |
|
Blue backlight and grey faceplate. |
|
Available in English, Spanish, Czech, French,
German, Hebrew, Italian, Polish, Portuguese, Russian, Swedish or
Turkish. |
|
Assign to one or more partitions. |
|
1 addressable zone and 1 PGM output. |
|
Independently set chime zones 14. |
|
One-touch action buttons. |
|
3 keypad-activated panic alarms. |
|
Adjustable backlight, contrast and scroll
speed. |
|
Built-in card reader. Just present access
card directly to the keypad module. |
|
Grant access via card and/or access code. |
|
Door contact and request for exit inputs. |
|
Door lock output. |
|
Programmable automatic unlocking schedule. |
|
Door Left Open and Door Forced Open alarms. |
|
Display time using the 12hr or 24hr format. |
|
|
DGP2-648 48-Zone LED Keypad Module |
Features |
|
48-zone LED display (each LED can
be set to display any zone number from 1 to 96) |
|
4-partition LED display (each LED can be set
to display any partition from 1 to 8) |
|
Assign to one or more partitions |
|
1 addressable zone and 1 PGM output |
|
Independently set chime zones |
|
14 one-touch action buttons |
|
3 keypad-activated panic alarms |
|
DGP2-ANC1 Annunciator Module
Features |
|
LED display shows the status of
either partitions 1-8, zones 1-48, or zones 49-96 |
|
3-in-1 product (comes with three different
display labels) |
|
Mount as a stand-alone unit or over any LCD
or LED keypad module |
|
Stack up to three annunciators |
|
Assign to one or more partitions |
|
|
DGP2-ZC1 Door Contact Module
Features |
|
1 addressable zone |
|
Small size: 74mm x 20mm x 30.5mm (2.9" x 0.8"
x 1.2") |
|
|
DGP2-ZX1 1-Zone Expansion Module
Features |
|
1 addressable zone (2 with ATZ
zone doubling feature) |
|
Set a different input speed for each zone (up
to 255 minutes), which is ideal for temperature monitoring
applications |
|
|
APR3-ZX4 4-Zone Expansion Module
Features |
|
4 addressable zones (8 with ATZ
zone doubling feature) |
|
Set a different input speed for each zone (up
to 255 minutes), which is ideal for temperature monitoring
applications |
|
Use zone input as an anti-tamper switch input |
|
|
APR3-ZX8
8-Zone Expansion Module
Features |
|
8 addressable zones (16 with ATZ
zone doubling feature) |
|
Set a different input speed for each zone (up
to 255 minutes), which is ideal for temperature monitoring
applications |
|
1 PGM output |
|
Use zone input as an anti-tamper switch input |
|
|
MG-RCV3 Magellan Wireless Expansion Module
Features |
|
Compatible with:
Stand-alone: 8 remote controls to activate on-board PGMs
Esprit: 8 remote controls to arm/disarm the system and control PGMs
Spectra: 8 wireless zones and 8 remote controls
Digiplex: 16 addressable zones and 16 remote controls |
|
Low battery, tamper and check-in supervision
(Spectra and Digiplex only) |
|
Transmitter signal strength display (Spectra
and Digiplex only) |
|
Up to 4 PGM outputs:
- 3 PGM outputs and 1 optional output (Esprit and stand-alone mode
only)
- 1 PGM output and 1 optional output (Spectra and Digiplex only) |
|
Noise level test and indicator |
|
Available in 433MHz or 868MHz |
|
Functions with all Magellan transmitters |
|
Includes one MG-REM1 remote control |
|
DGP2-ACM1P Access Control Module
Features |
|
Connections for card reader, REX,
door contact and lock output |
|
Automatic unlocking schedule |
|
Door left open and door forced options |
|
Door unlock and extended delay timers |
|
Grant access via card and/or access code (supports
CR-R885-BL PosiPIN reader) |
|
Unlock door manually with button or PGM event |
|
Built-in 1.5A switching power supply (supervised
only if used) |
|
Supports 26-bit Wiegand card readers |
|
Includes 20cm x 25.5cm x 7.6cm (8" x 10" x
3") metal box |
|
Version
2.0 of the Access Control Module (DGP2-ACM1P) includes the following
new features: |
|
Unlock Door On Fire Alarm option |
|
Safe Mode option (during a communication loss,
the access control door connected to the module can grant access to
up to 4 specified cards |
|
|
CR-R870-A Indoor Proximity Reader with 10cm (4in) Read Range |
Features |
|
Indoor intallation only |
|
Up to 10cm (4") read range with CR-R702-A ISO
PosiCard |
|
Two status LEDs (red and green) and beeper |
|
Output formats: 26-bit Wiegand, 37-bit
Wiegand and custom output formats |
|
Screw terminals |
|
Covers single gang box |
|
Dimensions: 11cm H X 7.3cm W X 2cm D (2.8" H
X 4.5" W X 0.8" D) |
|
Operating temperature: +10ºC to +65ºC (+50ºF
to +149ºF) |
|
Material: UV resistant, ABS plastic |
|
Available in black or white |
|
|
CR-R880-BL Indoor/Outdoor Proximity Reader with 10cm (4in) Read Range |
Features |
|
Extreme weather-resistant design |
|
Up to 10cm (4in) read range with CR-R702-A
Standard Proximity Card(Clamshell) |
|
26-bit Wiegand, 37-bit Wiegand and custom
output formats |
|
Tricolor LED display |
|
Advanced SwiftRead Technology |
|
Elegant blue face light |
|
|
CR-R885-BL Indoor/Outdoor Proximity Reader and Keypad with 10cm (4in) Read
Range, Access Version |
Features |
|
Extreme weather-resistant design |
|
Use as a keypad, reader or both |
|
Embedded 12-button keypad |
|
Up to 10cm (4") read range with ISO card |
|
Programmable face light, LEDs and buzzer |
|
Panic alarm output |
|
User-selectable PIN |
|
Keypad lockout feature |
|
|
CR-R890-BL
Indoor/Outdoor Extended Range Proximity Reader with 61cm (24in) Read
Range |
Features |
|
Extreme weather-resistant design |
|
Up to 61cm (24”) read range |
|
Wiegand, ABA and custom output formats |
|
Tricolor LED display |
|
Advanced SwiftRead Technology |
|
Elegant face light |
|
|
MG-WR1Magellan Access Receiver with Wiegand Interface |
Features |
|
Unlock doors using a remote
control |
|
Supports multiple Wiegand formats (including
standard 26-bit Wiegand) |
|
Supports unlimited number of MG-REM1 remote
controls and/or MG-RAC1 remote controls |
|
Each remote control has a programmable family
number and up to 5 card numbers |
|
Panic feature |
|
Control access to 2 doors with 1 interface |
|
Ideal for parking and condominium
applications |
|
433MHz and 868MHz frequency |
|
|
CR-R702-A
Standard Proximity Card (Clamshell)
Features |
|
Convenient credit card size |
|
Super-thin and flexible |
|
Vertical slot for clip attachment |
|
Durable PVC housing (white) |
|
Passive (no battery required) |
|
|
CR-R704-A
Proximity Key Tag
Features |
|
Attaches conveniently to a key
ring |
|
Durable plastic housing |
|
Passive (no battery required) |
|
Complete with custom label option |
|
|
CR-R706-A
ISO Proximity Card
Features |
|
Convenient credit card size |
|
Super-thin and flexible |
|
Vertical slot for clip attachment |
|
Durable PVC housing (white) |
|
Passive (no battery required) |
|
Suitable for high-quality photo ID printing |
|
|
MG-RAC1 Magellan Remote Control with Integrated Access Card
V2.0 |
Features |
|
Water resistant, stylish clear
blue plastic with backlight for buttons |
|
Perform up to 5 different actions |
|
Wireless range in a typical residential
environment:
- 30m (100ft) with MG-6060;
- 60m (200ft) with MG-RCV3 |
|
Available in 433MHz or 868MHz |
|
Built-in access card (present remote control
to a reader like an access card) |
|
|
APR3-PGM1
1-PGM Expansion Module
Features |
|
1 fully
programmable 5A relay output |
|
Deactivate PGM after event or timer |
|
Pulse
PGM output for fire alarms |
|
|
APR3-PGM4
4-PGM Expansion Module
Features |
|
4 fully programmable 5A relay
outputs |
|
Deactivate PGM after event or timer |
|
Pulse PGM output for fire alarms |
|
|
UIP-256 Universal In-Field Programmer |
|
Features |
|
Upgrade Grafica firmware locally
in the field |
|
Includes proprietary PC software, cables to
interconnect a Grafica keypad and a PC, and two 9V batteries |
|
The supplied PC software retrieves the latest
Grafica update file (firmware) from our website and then updates the
Grafica keypad |
|
Currently supports Grafica version 1.21 or
higher, but we plan to support other Paradox products when possible
in the future |
|
|
DGP2-ZX4
4-Zone Expansion Plug-in Device
Features |
|
Connects directly on main board |
|
4 addressable zones (8 with ATZ zone doubling
feature) |
|
Set a different input speed for each zone (up
to 7.65 seconds) |
|
Supported by DigiplexNE (DGP-NE96) |
|
|
APR3-HUB2 Hub and Bus Isolator
Features |
|
Used to divide the bus into two
completely isolated outputs (one output failure does not affect the
other) |
|
To be added when over 600m (2000ft) of single
or multiple bus wires are used |
|
Each output port can provide communications
up to 900m (3000ft) |
|
|
DGP2-TM1 Real-Time Plug-in Device
Features |
|
Connects directly on main board |
|
Keeps time and date during a complete power
failure |
|
8-year battery life expectancy (battery
included) |
|
Not required with DigiplexNE (DGP-NE96) |
|
|
PMC-3
Hand-Held Plug-in Memory Key
Features |
|
Download
or upload control panel programming in less than 5 seconds |
|
Connect
directly to memory connector on the control panel |
|
No need
for a telephone line, PC or any other peripheral device |
|
APR3-PRT1 Printer Module
Features |
|
Automatically/manually print
reports of zones/system events via a printer and/or PC |
|
Parallel and serial port connectors |
|
Assign to one or more partitions |
|
1 PGM output |
|
Available in English or Spanish |
|
|
DGP2-PS17 Power Supply Module
Features |
|
1.7A switching power supply |
|
Fully supervised (AC, battery, low
battery and auxiliary limit) |
|
Selectable battery charge current
(350mA/700mA) |
|
1 PGM output |
|
Includes 20cm x 25.5cm x 7.6cm (8" x 10"
x 3") metal box |
|
|
DGP2-DVAC DVACS Module
Features |
|
Provides constant power,
supervision as well as two-way communication between the control
panel and the Subset F1/F2 modem |
|
On-board RJ-11 jack |
|
Anti-tamper switch input |
|
Memory Key connector |
|
For use in Canadian markets only |
|
*DVACS is a registered
trademark of Electro Arts Limited and covers a wide variety of
products. |
|
|
|
306
Direct Connect Interface
Features |
|
Enables main board to communicate
onsite with a PC at 8m (25ft). |
|
Connect from main board's serial port
connector to PC's serial port (DB-9). |
|
Now includes Magellan/Grafica to 306 Adapter
Cable (0778708100). |
|
Communication speed:
- 57.6k baud with Magellan MG-6060
- 38.4k baud with Digiplex DGP-NE96
- 19.2k baud with Digiplex DGP-848 |
|
|
DNE-CONV2 RS-485/RS-232 Converter Kit
Features |
|
Enables main board to communicate
with a PC at 300m (1000ft) |
|
Connect from main board’s serial port
connector to PC’s serial port (DB-9) |
|
38.4k baud communication (DigiplexNE) or
19.2k baud communication (Digiplex) |
|
|
APR3-ADM2InTouch Voice-AssistedArm/DisarmModule |
|
Features |
|
Available in Czech, English, French,
Greek, Italian, Portuguese, Spanish and Turkish |
|
Arm, disarm, control on-board
PGM and verify system status via telephone |
|
Clear and concise voice prompts |
|
|
|
|
|